Stainless Steel Razor Barbed Wire Spiral BTO-10 / BTO-12

Spiral barbed wire (razor type)

• Roll of spiral wire diameter when pressed together is 900-1000 mm.
• Roll of spiral wire diameter when extended 850-900 mm.
• One unit of mounted spiral wire (roll) forms barrier unit which is 10-12 meter long in length.
• One unit of spiral wire (roll) has 50-60 spirals (turns).
• 
• Required mounting clamps for one spiral is at least 5.
• Barbed wire profile "short thorn" must be either:
  1. BTO-10: thorn length 10 ± 1 mm, thorn width 13 ± 1 mm, center distance between the thorns 26 ± 1 mm.
  2. BTO-12: thorn length 12 ± 1 mm, thorn width of 15 ± 1 mm, center distance between the thorns of 26 ± 1 mm.
• Used barbed wire material (plate) thickness has to be 0.5 + / - 0.05 mm.
• Used reinforced wire diameter has to be at least 2.5 ± 0.1 mm.
• Used reinforcing wire has to be galvanized steel wire.
• Used thorn (barbed tape) material has to be stainless steel.
• Spiral wire has to be reusable.

Materials and storage: All material lifespan (ie not corroded) in storage conditions (temperature -30 °C to +35 °C, relative humidity 60%) has to be at least 10 years.

Packing and marking

• Basic package (for one roll): Must ensure smooth cargo handling (loading, lifting) and prevent hand injuries by wire.
• Transport package marking: Transport package has to contain min. of 10 and max. 50 basic package (one roll). Basic packages has to be packed in to transport package in a way that ensures smooth and safe handling.