Cut Masonry Nails – Distinctive Head, Tapered Shank And Blunt Point
Product Description
Cut masonry nails, with blunt point and tapered shank, are made of hardened steel. Hardened steel, a very hard steel type, has a hardness greater than HRC50.Blunt point and tapered shank are designed for minimal spalling and splitting during operation, so as to offer a greater withdrawal resistance than other nails. These nails are specially used for hard materials such as cinder block, concrete and masonry. The head can be squared or wrought to create a distinctive and decorative finishing surface. So cut masonry nails are very popular in new and historic projects. Tips: do not forget use safety glasses when driving any hardened nails.
Parameter
|
SIZE |
APPROX. COUNTS PER POUND |
|
|
1-1/4" |
3D |
115 |
|
1-1/2" |
4D |
125 |
|
2" |
6D |
85 |
|
2-1/4" |
7D |
78 |
|
2-1/4" |
8D |
64 |
|
3" |
10D |
48 |
|
3-1/4" |
12D |
32 |
|
3-1/2" |
16D |
34 |
|
4" |
20D |
29 |
Specification
Material: hardened steel.
Material model: Q195, Q215, Q235.
Hardness: > HRC 50°.
Head: square, wrought.
Shank type: tapered.
Length: 1-1/2" – 20".
Point: blunt.
Style: Flat
Surface treatment: bright, electro galvanized, hot dipped galvanized.
Package: 25 kg/carton, 40 cartons/pallet, or as your demand.
Application
1.Projects
Masonry work.
Restoration work.
2.Substrates
Hinder block.
Mortar joints.
Brick walls.
Stone.
Reinforced concrete.
3.Purpose
Wood members fixation.
4.Note
Should not be used in treated lumber.
Should not be used where surface rust is unacceptable.
Features
1.Outstanding durability and holding power.
2.Minimal splitting during penetration.
3.High resistant to withdrawal.
4.High resistant to bending.
5.Various surface coatings for increased durability.
6.Various nail sizes for different requirements.
