Galvanized razor barbed wire fence: answers on sizes, coatings, and coils

The range includes these outside diameters and standard coil details:

• 450 mm: 33 loops and 8 m per coil, CBT-65, single coil
• 500 mm: 41 loops and 10 m per coil, CBT-65, single coil
• 700 mm: 41 loops and 10 m per coil, CBT-65, single coil
• 960 mm: 53 loops and 13 m per coil, CBT-65, single coil
• 500 mm: 102 loops and 16 m per coil, BTO-12.18.22, cross type
• 600 mm: 86 loops and 14 m per coil, BTO-12.18.22, cross type
• 700 mm: 72 loops and 12 m per coil, BTO-12.18.22, cross type
• 800 mm: 64 loops and 10 m per coil, BTO-12.18.22, cross type
• 960 mm: 52 loops and 9 m per coil, BTO-12.18.22, cross type

For a fence-top layout, compare the selected outside diameter with the clearance and support arrangement. For a denser barrier layout, compare the cross-type coil length and loop count with the section length you need to cover.

A single coil is a spiral coil format identified in the range as CBT-65. Single-coil options are 450 mm, 500 mm, 700 mm, and 960 mm in outside diameter.

A cross type is identified as BTO-12.18.22. It comes in 500 mm, 600 mm, 700 mm, 800 mm, and 960 mm outside diameters. Cross-type options have different loop counts and standard lengths per coil, so select the configuration together with the barrier layout and required coverage.

The product combines blade-shaped sheet with a wire core. The blade material is hot-dip galvanized steel sheet or stainless steel sheet. The core wire is high-tensile galvanized steel wire, razor wire stainless steel wire, or stainless steel wire, depending on the product selection.

When requesting a quotation, identify the blade material and core wire material you need. This keeps the material choice separate from the coil diameter and configuration.

Yes. The galvanized version uses galvanized steel in its construction and receives rust-protection processing. The product range also includes stainless steel sheet and stainless steel wire options, so specify the material selection with the order.

The galvanized razor barbed wire fence is intended for protective isolation. Its blade-shaped outer wire is difficult to touch, and the product receives anti-rust processing around the wire surface.

Start with the fence section, the installation space, and the required coil format. Then match those requirements to the outside diameter, loop count, and standard length per coil.

For example, a buyer planning a single-coil installation can compare the 450 mm, 500 mm, 700 mm, and 960 mm options. A buyer planning a cross-type installation can compare the five BTO-12.18.22 sizes from 500 mm to 960 mm. Ask for the selected type, diameter, standard coil length, and number of coils in the quotation.

Send the supplier these project details:

1. Coil configuration: CBT-65 single coil or BTO-12.18.22 cross type.
2. Outside diameter and required standard length per coil.
3. Blade and core wire material selection.
4. Number of coils required.
5. Fence layout or section lengths for the planned installation.

A clear inquiry helps match the requested quantity to the single-coil or cross-type format. Measure the installation sections and record the required diameter before asking for a quotation.